create_and_deploy.sh: improve build script
create_and_deploy.sh: improve build script Re-order modules alphabetically (e.g. Apalis iMX8, Apalis iMX8X and Colibri iMX8X). Force removal of generated DCD header files (e.g. do not error out in case...
View Articlemx8qx_apalis: allow debug output on regular console uart
mx8qx_apalis: allow debug output on regular console uart Rework to allow debug output on the regular console output. Using U=6 scfw can be built for UART1. Signed-off-by: Sven Guggisberg...
View Articlemx8qx_apalis: update all ramid timings to rev22 spreadsheet
mx8qx_apalis: update all ramid timings to rev22 spreadsheet Related-to: ELB-3324 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
View Articlemx8qm_apalis: update all ramid timings to official rev23 spreadsheet
mx8qm_apalis: update all ramid timings to official rev23 spreadsheet Related-to: ELB-3500 Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
View Articleboard: mx8qx_apalis: do not turn off ldo3 in standby
board: mx8qx_apalis: do not turn off ldo3 in standby From a hardware perspective it makes no sense to turn off this voltage in standby. So leave it enabled. Related-to: ELB-3569 Signed-off-by: Philippe...
View Articleplatform: makefile: do not generate ifndef define in ram headers
platform: makefile: do not generate ifndef define in ram headers The RAM header files are containing no definitions and only code. So the usual structure to make one header file only include once is...
View Articleadd error to our boardfiles if BD_LPDDR4_INC_DQS2DQ gets defined
add error to our boardfiles if BD_LPDDR4_INC_DQS2DQ gets defined This is a precaution, because NXP does only have one dcd_retention.h file which we do not use but NXP uses at board_common.c. If that...
View Articlescfw: forward port to 1.7.4: update docs
scfw: forward port to 1.7.4: update docs Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
View Articlecolibri-imx8x: remove ramid1 that is no longer used on scfw 1.7.4
colibri-imx8x: remove ramid1 that is no longer used on scfw 1.7.4 RAMID1 was only used for Colibri iMX8QXP 2GB WB IT V1.0B that had the Samsung K4F6E304HB-MGCJ placed. Remove this from code as we do no...
View Articlemx8qx_colibri:i Enable PMIC external watchdog
mx8qx_colibri:i Enable PMIC external watchdog In order to get a reset signal notification on the nRESET_OUT pin, a SCU_WDOG_OUT signal was enabled. nRESET_OUT produces either by the reset button or by...
View Articlegitlab-ci: build scfw used in our production also with ci
gitlab-ci: build scfw used in our production also with ci in production we use an scfw compiled with the debug monitor to program PMIC and or SoC fuses independent of the RAM timings. Related-to:...
View Articleplatform: makefile: do not generate ifndef define in ram headers
platform: makefile: do not generate ifndef define in ram headers The RAM header files are containing no definitions and only code. So the usual structure to make one header file only include once is...
View Articleapalis-imx8qm: integrate new ramid4 ram timing
apalis-imx8qm: integrate new ramid4 ram timing This RAM timing is for the new BTO: 0067 Apalis iMX8 QuadMax 8GB Wi-Fi / BT IT This new Product uses two LPDDR4 RAM chips with manufacturer number...
View Articleapalis-imx8: board: remove function pmic_match_otp
apalis-imx8: board: remove function pmic_match_otp PMICs are usually leaving the factory of NXP in a fused state. We do order them unfused and fuse them in our production. The function pmic_match_otp...
View Articleapalis-imx8: fix setting up apalis-uart1
apalis-imx8: fix setting up apalis-uart1 Since RAM initialization can be skipped using SKIP_DDR=1 while compiling, apalis-uart1 as SCU debug-uart did no longer work. This commit reworks the solution to...
View Articleplatform: makefile: do not generate ifndef define in ram headers
platform: makefile: do not generate ifndef define in ram headers The RAM header files are containing no definitions and only code. So the usual structure to make one header file only include once is...
View Articlemx8qx_colibri: improve setup debug-uart
mx8qx_colibri: improve setup debug-uart So far, if one wanted to compile the SCFW for Colibri iMX8X to use the Colibri UART_A (standard debug uart) using compile-option U=6, it was dependending on a...
View Articlemx8qx_colibri: add tbben gpio switch
mx8qx_colibri: add tbben gpio switch To be able to fuse PMIC from SCFW one needs to be able to toggle the internal TBBEN pin. This was implemented using the custom command in the board.c file....
View Article--- Article Not Found! ---
*** *** *** RSSing Note: Article is missing! We don't know where we put it!!. *** ***
View Article--- Article Not Found! ---
*** *** *** RSSing Note: Article is missing! We don't know where we put it!!. *** ***
View Article
